Taylormade M3 Vs M5 Driver Comparison

This article will provide you a comparison of the TaylorMade m3 vs m5 driver. In case you have confusion on both the marvelous drivers, namely m3 and m5.

You will get a brief comparison of both the drivers, only to provide you a better understanding of which one to purchase.

The TaylorMade m5 is the successor of the m3 and m4 while having a few improvements required on the previous models.

Aside from the added features, have you made up your mind on which one to purchase based on skills and budget?

They might be very similar at first peek, but they are manufactured for different player profiles and purposes when it comes to engineering.

Then again, you will have to study their characteristics before making up your mind. Let’s get down on the article to know the actual difference!

TaylorMade M3 Driver

In this TaylorMade m3 driver review, the primary thing you will notice is the Twist Face Design.

Twist Face:

This design is made specifically for the m3, which is the curvature wood face that will impart the spin oppositely on the off-center hits.

The design provides much straighter shots than usual. On the first peak, the design is not visible, but when you look down from the club crown’s side, you will see the curvature called the Twist Face.

If you have the trait of hitting the ball higher in the side of the toe, then the face becomes closer and will reduce the overall spin. The Twist face is open from that side to add some loft and increase the overall spin, resulting in the ball going straight.

Hammerhead:

But, the breaking point of m3 is the supporting bars which are not suitable for the off-center hits. When comparing the Hammerhead on TaylorMade m3 and m5 driver, the futuristic m5 has a singular supporting bar in the Hammerhead, enabling it to have a grip over off-center hits.

Design:

In the overall design, when we take a look at the comparison of the TaylorMade m3 vs m5 driver, there is a clear difference in the design. The m3 comes with a straightforward and clear design, much similar to the previous m1; there is a whole section that is silver made and is slimmer.

Durability is still there on both the drivers because m3 comes with five different layers of carbon material, which results in a lighter body with more durability. Coming towards the shaft, the m3 comes with a professional Mitsubishi Tensei, but you can change it with another one if you want to.

The accuracy of the shaft loft is +-2 degrees and the Speed Pocket on the central side to be more flexible. The weights present on the front gave a yard of more distance, allowing for a lower flight and more spin rate.

TaylorMade M5 Driver

Illegal thinness of the drivers to stay in touch with the rules has been a problem for a long. But when compared to the TaylorMade m3 vs m5 driver, the m5 seems to solve the problem. The problem was solved because of the speed circles that are present on the front side of the driver’s face.

Resin is the stuff that keeps the whole face together; in the m5, these resins are in 2g amount. This amount is just enough to keep the head’s weight in the right amount to have a starting balance.

Twist Face:

Challenging the TaylorMade m3 vs m5 driver, the same old Twist Face has been adapted. The Twist means, a curvature to provide straighter shots, same as the old m3 but with several changes. A bulge for better handling, Roll on the Driver Face for the overall direction and spin of the ball.

Hammerhead:

Aside from that, the new HammerHead 2.0 provided on the m5 has a singular supporting bar, which allows you to have more speed to the off-center hits, too, unlike the m3. The results are a sixty-six percent sweeter spot with a lighter driver.

Design:

The m5 has a unique design that makes it twenty percent thinner and has 3.5g of lighter weighing body. Just like the previous m3, on the comparison, the m5 still has that extra loft, which is hard to see in the parts of the lower loft and the high toe. You will have 1.9 mph more speed on the ball at the swing speed of 100 mph. Comparing the TaylorMade m3 and m5 driver, the newer one called m5 has a deeper face and more details on the circular markings.

Another exciting thing about m5 is that it resembles the m1 from the beginning of the series of TaylorMade. The same old sliding weights of 10 grams are in the inverse T track, which is the same as the legendry m1. The maximum amount of settings you can come up with for the TaylorMade m5 are 1,770, as promised by the company itself. The hosel comes with seven options across the variations of +-1.5 degrees. You have a vast choice of adjustability in m5.

Comparison Between The Taylormade M3 Vs M5 Driver:

Actually, both of them are the masterpiece of their respective periods, but when it comes to some short points, m5 is the actually same as the previous m3. The difference in price point might lead you to pick the m3 as a beginner. Other than that, there are some points in which the m5 really stands out not only in front of m3 but also other drivers of the range.

Design/Twist Face:

TaylorMade m3 comes with the Twist Face design, which is also adapted in the successor of m3, called m5. Although they are nearly the same but still, there are a few places where the m5 really outshines the m3.

When talking about the straighter shots in the middle, the m5 comes with more bulge and face roll, which is a short improvement. So, you can go with the m3 on this factor because it comes with less price range.

Quality:

Really, when comparing the TaylorMade m3 vs m5 driver, the m5 is way ahead with its engraved markings. Both consist of 5 different layers of carbon, with silver in the center and shine on front and back. There are also the club differences; the m3 is not much good with handling while the m5 feels premium in hand. Also, the sound is much more realistic.

Structure:

The vital thing to notice when comparing both drivers is that the m5 is way thinner and lighter as compared to the m3. It comes with twenty percent more thinness and a body that weighs 3.4 grams less than the m3. The result is a sweeter spot on the driver, beating the m3 with a 66 percent sweeter spot.

Hammerhead:

In the m3, you get the Hammerhead 1.0, which comes with many supporting bars, but in the m5, you get only one. The Hammerhead 2.0 introduces with the Speed Injection technology enables us to have only a singular supporting bar, ultimately providing more speed on the off-center hits.

Speed:

M5 might be more optimized than the m3, but the speed difference lies only in the structure and weight. In real-time, the m5 is only 2mph faster than the m3 on an average basis. In case you have a slower than the average recorded face, then you can get more gains.

Weight Adjustments:

The adjustment, the m5 favors the legendry m1 as compared to the m3. There were some drawbacks in the m1, which were corrected in the m3. But the m5 managed to get the maximum out of Inverse T Track weight adjustment, which means you will have the weight adjusting capability on the back of the face over the edge. So, overall, the TaylorMade m3 vs m5 driver comparison on weight adjustment leads to the m5 being the winner with 10g more weight adjustments.

Adjustability Features:

With those weight adjustments, the m3 is left way behind the mark because there are possibly 1770 different types of possibilities in CG settings per change in the loft. Aside from that, there are seven different types of options across the shaft leading towards +-1.5degree changes. These settings are way more than the m3, but you probably cannot use the whole adjustment feature for a beginner.

Here you can watch the video:

Conclusion

With that being said, the comparison of the TaylorMade m3 vs m5 driver leads to the m5 being a winner. But it doesn’t mean the m3 is overall looser. The m3 is way lower in price point and is favorable for beginners due to the fewer adjustments required. On the other hand, TaylorMade m5 comes with more adjustability features in the nearly same Twist Face design and Hammerhead with a bit more corrections.

So, it all falls on the budget you have and the experience you possess with driver handling. If you are a beginner with a low budget, then indeed, m3 isn’t the wrong choice. Or if you are experienced enough with drivers and also have more budget, then m5 is undoubtedly the winner here.